• 4m Bell Tent

Price From:

£530.00

4m Bell Tent

For more info on our standard features - see below.

Our most compact bell tent which features the following:

  • 350gsm fabric (before treatment) in a 65/35 poly-cotton mix to be waterproof, mould/rot treated and Fire Retardant to ISO 6941.
  • Groundsheet @ 540gsm PVC, Fire Retadent.
  • Floor area 11.7 square metres, 
  • Flue hole/chimney @ 50cm in approved KEVLAR material.
  • Wooden Centre Pole in 3 parts  with brushed aluminium connector sleeves.
  • 4 half round mesh windows In wall with curtain/flap to outside.
  • 2 round clear PVC windows in front door panels with curtain/flap to inside and outside.
  • Inner Mesh Front Doors with separate zips from main door panels
  • 10mm marine grade nylon guy ropes
  • Wooden Sliders on guy ropes
  • Wooden Toggles to front door
  • Reinforced 10mm steel pegs to outer guy ropes.
  • 8mm ribbed steel pegs with dual function pegs with nylon tops for inner groundsheet.
  • Steel mallet for strength and stability.
  • Packed in 2 inner bags in outer transit bag.
  • A range of optional extras.
  • Total weight 40kg
  • Off white canvas and groundsheet

Frequently Asked Questions

All your questions answered here and if we have omitted.

Resource and Advice

Hints and Tips on how to look after your Belltent. Find out more.

Visit Us

Our tents are designed and developed near Bath in UK and, we always have a selection of units on display at our Show Field. You will find us at Tormarton in The Cotswolds – see map @ xxxxxxx(link). You are welcome to visit us between 09:00 and 18:00. Please Contact Us to make an appointment.

Features

All our bell tents come with the following features as standard

350gsm fabric
350gsm fabric

Heavier than the competitors, our 350gsm fabric (before treatment) is a 65/35 poly-cotton mix. The cover is waterproof, mould/rot treated and fire retardent to ISO 6941. Standard in traditional off-white colour for the coolest of summers and greatest protection on the not so cool days.

540gsm Groundsheet - ZIG
540gsm Groundsheet - ZIG

Heaviest duty groundsheet in Fire Retardent PVC, this gives you full protection from any rising damp and cold. The zipped in groundsheet gives you the ultimate protection and reduces tent maintenance through your stay as you seal yourself in against the Outside. The groundsheet can be removed for separate transport and storage and, is zipped in two half sections, allowing partial opening when onsite.

540gsm Groundsheet - PIG
540gsm Groundsheet - PIG

Heaviest duty groundsheet in Fire Retardent PVC, this gives you full protection from any rising damp and cold. The pegged in groundsheet gives you the ultimate protection. The separate groundsheet makes for lighter transportation and storage as it packs away separately from the main tent. The PIG option allows you to set up the bell tent without the groundsheet should this be your preference and makes for easy ‘rolling up’ of the sides for that cool through draft on hot days.

Inner Mesh Doors
Inner Mesh Doors

Two inner mesh doors with their own zips allow you to have the main canvas doors open allowing light and fresh air whilst still keeping the midgies out.

Half round Mesh Windows
Half round Mesh Windows

Providing ventilation and, allowing you to check out the view outside from the inside, these zip-open half round mesh windows are protected by tie back curtains. Mesh panels when closed keep the ‘midgies’ out.

Round PVC Windows
Round PVC Windows

Set higher up in the door panels, allowing in light and a look-out port-hole, these clear windows have drop-down curtains to both inside and out.

Integral Flue Hole
Integral Flue Hole

For easy fitting of a wood-burning stove, this integrated Kevlar flue hole panel is fitted to the front panel in the lower wall. It is protected to the outside with a zipped drop-down curatin panel

Wooden Centre Pole
Wooden Centre Pole

3m high and supplied in 3 parts, this softwood pole with brushed aluminium connector sleeves @ 50mm thick, this pole gives strong support to the tent and is so much nicer to the touch than the more common metal centre pole, from our competitors. The pole comes complete with an engraved wooden saucer to protect wear on the groundsheet.

Steel A Frame Front Support Doors
Steel A Frame Front Support Doors

Push-button spigot fit for easy pack-away, the powder coated steel A Frame gives the front its shape and maintains the rigidity of your tent whilst up.

Reinforced Pegs
Reinforced Pegs

Ribbed steel 10” pegs for the outer guy ropes provide for maximum stability in the heaviest of winds. The inner ring of pegs are strengthened bright steel @ 10” for securing both the groundsheet and the base of tent walls to the hardest of grounds. Spares come as standard.

Guy Ropes
Guy Ropes

Marine grade 10mm nylon guy ropes give your tent the ultimate strength and stability. These are fitted with wooden sliders which are both more visually appealing and more secure than the readily available thin nylon guy ropes and plastic adjusters. Spares come as standard.

Wooden Toggles
Wooden Toggles

Secondary rope ties and wooden toggles add security to the front whilst away and protect the front zip from any lashing rains

Steel Mallet
Steel Mallet

Stronger than the standard rubber-head equivalent, this mallet will not fly off the handle, causing personal injury

Two Storage/Carrying Bags
Two Storage/Carrying Bags

Your tent comes to you boxed and packed neatly away in an outer bag – inside which are two canvas inner bags for sharing the load between main canvas and groundsheet/accessories for ease of transportation.

Instructions and Storage Advice
Instructions and Storage Advice

Your bell tent will come complete with instructions on how to build, break down and pack away, along with essential tips on maintenace, storage, 'weathering' and mould avoidance.

Click here to download a copy